MacLabelPro version 1.63 contains a complete set of files and labeling templates for Avery MacLabelPro software. MacLabelPro users upgrading from versions 1.50 - 1.61 will find many new Avery templates such as these listed below:
Product (Product code)
Business Cards (5371)
TitleFrames™ (TFS11-10 and TFS11-15)
WorkSaver™ (5-Tab WI2135, 8-Tab WI2138, 1/3-Cut 11137, and 1/5-Cut 11136)
Laser Index Layouts (15-Tab, Protect 'n Tab 5-Tab)
Mini-Sheets™ (2160, 2162, 2163, 2180, 2183, and 2186)
After installing the MacLabelPro software, you can locate the Business Cards and TitleFrames templates in the Laser Cards folder. WorkSaver templates are located in the Laser Indexes folder. Laser Index Layouts, Mini-Sheets, and Ink Jet Printer Labels can be located in their respective folders. Contact your dealer for product availability of Avery Laser Label Mini-Sheets™, Ink Jet Labels or other Avery products.
Landscape laser label templates are available for many of the Avery laser labels products. Landscape laser label templates are located in the same folder as the original portrait template. Landscape laser label templates are designated by a trailing 'L' after the product number (e.g. 5163 L).
The Laser Index Layout folder contains pre-designed documents for a variety of Avery IndexMaker and WorkSaver products. To protect the original design these document have been setup as write-locked stationary pads. After opening any of the Laser Index Layout documents you must change the name of the original document with Save As.
To view the properties of any document, select the document on the desktop and choose Get Info from the File menu. Write-locked documents must be unlocked to be trashed.
Printer Alignment instructions for calibrating non-Apple printers are included in the MacLabelPro folder. After installing the MacLabelPro software, follow the instructions in the Readme Printer Calibration document.
Included in the MacLabelPro folder is an empty folder named All Designs & Merge Data. This folder is available for you to store your own labels and merge data files. If you are upgrading from an earlier version of MacLabelPro, you may want to transfer previously designed labels and merge files to this folder.
The US Postal Bar Code font has been updated for both PostScript and TrueType fonts. The installation procedure places the US Postal PostScript font and driver in the system folder for System 6 users and the US Postal TrueType fonts (no driver required) in the system folder for System 7 users. Note: System 7 users can use the US Postal PostScript font, but you must remove the US Postal TrueType font prior to loading the US Postal PostScript font and driver in the system folder.
Note: The installer creates a new folder named Avery MacLabelPro™. If you have a previous version of MacLabelPro, the folder containing it will not change. After installing the new software, you should transfer any user designs and merge data you wish to keep to the new folder and then remove your old MacLabelPro folder.
1. Insert the MacLabelPro diskette in your computer.
2. Double-click the Install MacLabelPro icon on this diskette.
3. Click the Continue button on the MacLabelPro logo screen.
4. Drag the MacLabelPro icon on the left to your hard disk on the right.
5. Click Quit, after "Installation Complete" message is displayed.
6. Remove the MacLabelPro diskette and store it in a safe place.
Installing LabelPrinter desk accessory - System 7:
1. Open the Avery MacLabelPro folder on your hard drive.
2. Open the MacLabelPro Accessories folder.
3. Open the LabelPrinter DA folder.
4. Drag the LabelPrinter 1.63 icon to the System Folder icon.
5. Open the Postal Font folder.
6. Open the TrueType - System 7 folder.
7. Open the Avery3PostNet.suit suitcase.
8. Drag the Avery3PostNet 36 document to the System Folder icon.
9. Close the MacLabelPro Accessories folder.
Installing LabelPrinter desk accessory - System 6:
1. Open the Avery MacLabelPro folder on your hard drive.
2. Open the MacLabelPro Accessories folder.
3. Open the LabelPrinter DA folder.
4. Double-click the LabelPrinter 1.63 icon to run the Font/DA Mover.
(The LabelPrinter™ appears in the left window.)
5. Click the Open button under the right window. Locate and open the active system file in the System folder. (All Desk Accessories appears in the window.)
6. Click the LabelPrinter in the left window to highlight it.
7. Click the Copy button. (A copy of the LabelPrinter appears in the right window.)
8. Click the Font button at the top of the screen. The fonts available on the system appears in the right window.
9. Click the Open button under the left window. Locate and open the Avery3PosNet.bmap file in the Postscript - System 6 folder. (The Avery3PostNet 36 appears in the left window.)
10. Click Avery3PostNet 36 to highlight it.
11. Click the Copy button. (A copy of Avery3PostNet 36 appears in the right window.)
Avery provides telephone technical support for Avery software products and the Personal Label Printer. Avery is also on the COMPUSERVE INFORMATION SERVICE under GO AVERY.
If you have a question about an Avery software product or the Personal Label Printer, look in the printed manual or the on-line Help. If you cannot find the answer, contact Avery Technical Support using the procedure described below.
Before you telephone Avery Technical Support
When you call, you should have detailed information and if possible be at your computer with your Avery software running and the product manual at hand. Have your document open and be prepared to give the following information:
• The name and version of the Avery software that you are using
• The type of hardware you are using, including network hardware, if applicable
• The operating environment that you are using (including system version number)
• The exact wording of any messages that appear on your screen
• A description of what you were doing and what happened when the problem occurred
• How you tried to solve the problem
To call Avery Technical Support
Worldwide: There is a card with your printed documentation that lists the nearest Avery Technical Support telephone number.
US and Canada: Call (214) 888-2699 or Fax questions to (214) 241-0395.
Call between the hours of 9 A.M. and 5 P.M. Monday through Friday local time.
Avery support services are subject to Avery's prices, terms, and conditions in place at the time the service is used.
